Loading...
King County Metro Transit: Allison Hybrid Electric Transit Bus Laboratory Testing
9/1/2006
The National Renewable Energy Laboratory's ReFUEL facility conducted chassis dynamometer testing of two 60-foot articulated transit buses, one conventional and one hybrid. Both test vehicles were 2004 New Flyer buses powered by Caterpillar C9 8.8L engines, with the hybrid vehicle incorporating a GM-Allison advanced hybrid electric drivetrain. Both vehicles also incorporated an oxidizing diesel particulate filter. The hybrid vehicle demonstrated the greatest improvement in fuel economy in the low speed, heavy stop-and-go driving conditions of the Manhattan (N.Y.)test cycle (74.6%), followed by the Orange County (Calif.) test cycle (50.6%), the Central Business District cycle (48.3%), and the King County (Wash.) Metro test cycle (30.3%). Emission trends were similar to fuel economy improvement trends. The hybrid shoed reductions in NOx emissions over the Manhattan cycle (38.7%), the Orange County cycle (28.6%), the Central Business District cycle (26.6%), and the King County test cycle (17.8%). Vehicle exhaust emissions, fuel consumption, and state of charge of the energy storage system were measured for repeated test conditions. The remainder of this document includes the experimental setup, test procedures, and results from vehicle testing performed at the NREL ReFUEL laboratory.
Authors: Hayes, R.R.; Williams, A.; Ireland, J.; Walkowicz, K.
Case Study: Ebus Hybrid Electric Buses and Trolleys
7/1/2006
The Indianapolis Transportation Corp. and Knoxville Area Transit participated in a demonstration of hybrid electric buses and trolleys produced by Ebus, Inc. of Downey, California. This is a case study of performance, costs, and maintenance experience.
Authors: Barnitt, R.
SunLine Expands Horizons with Fuel Cell Bus Demo
5/1/2006
Sunline Transit Agency, a joint powers authority that provides public transit and community services to California's Coachella Valley, was an early adopter of alternative fuels for bus operations. SunLine replaced its diesel fleet with CNG buses and has worked to further reduce emissions. SunLine is currently testing a prototype fuel cell bus.
Hybrid Electric Vehicle Fleet and Baseline Performance Testing
4/3/2006
The U.S. Department of Energy's Advanced Vehicle Testing Activity (AVTA) conducts baseline performance and fleet testing of hybrid electric vehicles (HEV). To date, the AVTA has completed baseline performance testing on 7 HEV models and accumulated 1.4 million fleet testing miles on 26 HEVs. Tested models include: Toyota Gen I and Gen II Prius, and Highlander; Honda Insight, Civic and Accord; Chevrolet Silverado; Ford Escape; and Lexus RX 400h. The baseline performance testing includes dynamometer and closed track testing to document the HEV's fuel economy and performance in a controlled environment. During fleet testing, two of each HEV model were driven to 160,000 miles per vehicle. At the conclusion of the 160,000 miles of fleet testing, fuel economy tests were rerun and each HEV battery pack was tested. The paper discusses the testing methods and results.
Authors: Francfort, J.; Karner, D.; Harkins, R.; Tardiolo, J.
Notes: Paper is available for purchase from SAE.
King County Metro Transit Hybrid Articulated Buses: Interim Evaluation Results
4/1/2006
This is an interim technical report comparing and evaluating new diesel and diesel hybrid-electric articulated buses operated as part of the King County Metro Transit fleet in Seattle, Washington. This report covers the first six months of a planned 12-month evaluation.
Authors: Chandler, K., Walkowicz, K.
Credit for New Qualified Alternative Motor Vehicles (Advanced Lean Burn Technology Motor Vehicles and Qualified Hybrid Motor Vehicles)
1/13/2006
On January 13, 2006, the Internal Revenue Service (IRS) issued guidance regarding the tax credits for light-duty (less than 8,500 lbs. GVWR) lean-burn and hybrid electric vehicles. The guidance establishes the procedures that manufacturers must use to certify that their vehicles qualify for the tax credit. The IRS plans to issue additional guidance at a later date to address procedures for qualifying alternative fuel vehicles, fuel cell vehicles, and heavy-duty hybrid vehicles.
The guidance provides procedures whereby a manufacturer may certify to the IRS that its vehicles qualify for the tax credits enacted in EPAct 2005. The guidance also provides procedures for reporting on the total number of qualifying vehicles that have been sold. Upon receiving the required information, the IRS will issue an acknowledgement. A manufacturer that has submitted the proper certification and received an acknowledgement from the IRS may then certify to customers/puchasers that the vehicles qualify for tax credits. For taxpayers to claim the credit, they must place the vehicle in service after December 31, 2005. The taxpayer also must be the original user of the vehicle (first purchaser or lessee) and the vehicle must be predominately used in the U.S.
Energy Policy Act of 2005
8/8/2005
The Energy Policy Act of 2005 (EPACT 2005) included measuring governing energy efficiency, renewable energy, oil and gas use, clean coal power, nuclear energy, and vehicles and fuels including the use of alternative fuels, hybrid vehicles, fuel cell buses, clean fuel school buses, automobile efficiency, and diesel emissions reduction.
Authors: Public Law 109-58, 109th Congress
Overview of Advanced Technology Transportation, 2005 Update
8/1/2005
This overview of the 2005 transportation market includes hybrid, fuel cell, hydrogen, and alternative fuel vehicles. It covers vehicle sales, emissions, potential partners, advanced technology vehicle availability, and other factors. It also offers a "snapshot" of current vehicle technologies and trends.
Authors: Barnitt, R.; Eudy, L.
Yosemite Waters Vehicle Evaluation Report: Final Results
8/1/2005
This study was a joint effort between the South Coast Air Quality Management District (SCAQMD) and the National Renewable Energy Laboratory (NREL). The overall goal of the project was to evaluate the use of gas-to-liquid (GTL) fuel in combination with passive catalytic regenerative particle filters in real-world service and characterize regulated and unregulated exhaust pollutant emissions from GTL fuel in comparison to petroleum-derived diesel fuel.
Authors: Eudy, L.; Barnitt, R.; Alleman, T.
Well-to-Wheels Analysis of Advanced Fuel/Vehicle Systems - A North American Study of Energy Use, Greenhouse Gas Emissions, and Criteria Pollutant Emissions
5/30/2005
An accurate assessment of future fuel/propulsion system options requires a complete vehicle fuel-cycle analysis, commonly called a well-to-wheels (WTW) analysis. In this WTW study, we analyzed energy use and emissions associated with fuel production (or well-to-tank [WTT]) activities and energy use andemissions associated with vehicle operation (or tank-to-wheels [TTW])activities. Energy resources, such as petroleum, natural gas (NG), coal, and biomass, as well as the energy carrier, electricity, are considered as feedstocks to produce various transportation fuels, including gasoline, diesel fuel, hydrogen (H2), ethanol (EtOH), compressed natural gas (CNG), methanol (MeOH), and Fischer-Tropsch (FT) diesel. The propulsion systems evaluated were spark-ignition (SI) engines, compression-ignition (CI) engines, hydrogen fuel cells, and fuel processor fuel cells, all in non-hybrid and hybrid electric configurations.This study updates and supplements a previous (2001) North American study, conducted by GM and others (General Motors [GM] et al. 2001), of energy consumption and greenhouse gas (GHG) emissions associated with advanced vehicle/fuel systems (GM Phase 1 North American study). The primary purposeof this Phase 2 study is to address criteria pollutant emissions, including volatile organic compounds (VOCs), carbon monoxide (CO), nitrogen oxides (NOx), particulate matter with a diameter smaller than 10 microns (PM10), and sulfur oxide emissions (SOx). We also updated the vehicle modeling for energyconsumption with the latest powertrain maps and added some additional propulsion systems, such as hydrogen internal combustion engines (ICEs).As in the previous study, the vehicle modeled was a 2010-model-year, full-sized GM pickup truck. The truck was selected because it is a high seller among light-duty vehicles (cars and trucks) in the U.S. market, and light-duty trucks account for a large proportion of the fuel used in the U.S. vehicle fleet. In our study, we attempted
Authors: Brinkman, Norman; Wang, Michael; Weber, Trudy; Darlington, Thomas
Biomass Power and Conventional Fossil Systems with and without CO2 Sequestration--Comparing the Energy Balance, Greenhouse Gas Emissions and Economics
1/31/2004
Power generation emits significant amounts of greenhouse gases (GHGs), mainly carbon dioxide (CO2). Sequestering CO2 from the power plant flue gas can significantly reduce the GHGs from the power plant itself, but this is not the total picture. CO2 capture and sequestration consumes additional energy, thus lowering the plant's fuel-to-electricity efficiency. To compensate for this, more fossil fuel must be procured and consumed to make up for lost capacity. Taking this into consideration, the global warming potential (GWP), which is a combination of CO2, methane (CH4), and nitrous oxide (N2O) emissions, and energy balance of the system need to be examined using a life cycle approach. This takes into account the upstream processes which remain constant after CO2 sequestration as well as the steps required for additional power generation.
Authors: Spath, Pam; Mann, Margaret
