Loading...
Compendium of Regulatory Language of U.S. Idle Ordinances and Laws
2/1/2009
Beginning with EPA's model state idling law, this document presents the regulatory language for all known city, county, multi-jurisdictional, and statewide idle laws across the United States. The regulatory language presented represents idle laws as incorporated by the controlling authorityat the time of collation. These laws vary in their prescribed maximum idle times, number and type of exceptions, and geographic scope. They are presented so that an interested party can use these laws to help guide creation of idle laws that suit their area. Pdf includes an interactive contents page to direct reader to state and city.
School Bus Idling Reduction: Project Report and Implementation Guide for Oklahoma School Districts
1/1/2009
School bus idling wastes fuel and financial resources while producing exhaust emissions that are harmful to human health and the environment. Beginning in late 2006, the Association of Central Oklahoma Governments, Choctaw-Nicoma Park Public Schools, and the Oklahomas Department of Environmental Quality undertook a two-year project to determine the extend of fuel and emissions savings that Oklahoma school district might expect by instituting a maximum five-minute school bus idling policy. This report offers the study's findings to public school districts in Oklahoma and elsewhere. Results indicate that for every five minutes of daily idling time reduced over the course of a school year, 7.5 gallons of fuel per bus can be saved for a collective savings of more than 58,000 gallons of diesel fuel saved annually.
Energy Use and Emissions Comparison of Idling Reduction Options for Heavy-Duty Diesel Trucks
11/15/2008
Pollution and energy analyses of different idling reduction (IR) technologies have been limited to localized vehicle emissions and neglected upstream energy use and regional emissions. In light of increasing regulation and government incentives for IR, we analyzed the full-fuel-cycle effects of contemporary approaches. Our analysis incorporates direct impacts at the truck and upstream energy use and emissions estimates from the GREET model with published climate and vehicle operation data. We compared emissions, energy use, and proximity to urban populations for nine alternatives, including idling, electrified parking spaces, auxiliary power units, and several combinations of these.
Two Billion Cars: Transforming a Culture
11/1/2008
Can the planet sustain two billion vehicles? The answer is no-at least not as they exist today. The transportation community needs to summon its ingenuity to transform the vehicles and fuels commonly used today, introduce new mobility options, and alter unsustainable travel behaviors to accommodate both a growing population and a need for a sustainable planet.
Authors: Sperling, D.; Gordon, Deborah
Petroleum Reduction Planning Tool
11/1/2008
The Petroleum Reduction Planning Tool helps fleets, consumers, and business owners create a strategy to reudce conventional fuel use in fleet and personal vehicles. This interactive tool allows users to evaluate and calculate petroleum reductions by choosing one or a combination of methods.
Full Fuel-Cycle Comparison of Forklift Propulsion Systems
10/14/2008
This report examines forklift propulsion systems and addresses the potential energy and environmental implications of substituting fuel cell propulsion for existing technologies based on batteries and fossil fuels. Industry data and the Argonne National Laboratory’s Greenhouse Gases, Regulated Emissions, and Energy Use in Transportation (GREET) model are used to estimate full fuel-cycle emissions and use of primary energy sources. Also considered are other environmental concerns at work locations. The benefits derived from using fuel cell propulsion are determined by the sources of electricity and hydrogen. In particular, fuel cell forklifts using hydrogen made from the reforming of natural gas had lower impacts than those using hydrogen from electrolysis.
Authors: Gaines, L.L.; Elgowainy, A.; Wang, M.Q.
Clean Cities Annual Metrics Report 2007
9/1/2008
This report summarizes the Department of Energy's Clean Cities coalition accomplishments in 2007, including petroleum displacement data, membership, funding, sales of alternative fuel blends, deployment of AFVs and HEVs, idle reduction initiatives, and fuel economy activities.
Authors: Johnson, C.; Bergeron, P.
Long Beach Transit: Two-Year Evaluation of Gasoline-Electric Hybrid Transit Buses
6/1/2008
This report is part of a series of evaluations from the U.S. Department of Energy (DOE). DOE, through the National Renewable Energy Laboratory (NREL), has been tracking and evaluating new propulsion systems in transit buses and trucks for more than 10 years using an established and documented evaluation protocol. This report is part of a series of evaluations from the U.S. Department of Energy (DOE). DOE, through the National Renewable Energy Laboratory (NREL), has been tracking and evaluating new propulsion systems in transit buses and trucks for more than 10 years using an established and documented evaluation protocol.
Authors: Lammert, M.
Life-Cycle Assessment of Energy and Greenhouse Gas Effects of Soybean-Derived Biodiesel and Renewable Fuels
3/1/2008
The life-cycle energy and greenhouse gas (GHG)emission impacts of three soybean-derived fuels were studied by expanding, updating, and using Argonne National Laboratory's Greenhouse Gases, Regulated Emissions, and Energy Use in Transportation (GREET) model. The fuels studied included biodiesel produced from soy oil transesterification; renewable diesel produced from hydrogenation of soy oil by using two processes (renewable diesel I and II); and renewable gasoline produced from catalytic cracking of soy oil. Four allocation approaches were used to address the co-products: a displacement approach; two allocation methods, one based on energy value and one based on market value; and a hybrid approach that integrates both the displacement and allocation methods. Each of the four allocation approaches generated different results and demonstrate the importance of the methods used in dealing with co-product issues for these renewable fuels.
Authors: Huo, H.; Wang, M.; Bloyd, C.; Putsche, V.
Use of U.S. Croplands for Biofuels Increases Greenhouse Gases Through Emissions from Land Use Change
2/7/2008
Most prior studies have found that substituting biofuels for gasoline will reduce greenhouse gases because biofuels sequester carbon through the growth of the feedstock. These analyses have failed to count the carbon emissions that occur as farmers worldwide respond to higher prices and convert forest and grassland to new cropland to replace the grain (or cropland) diverted to biofuels. By using a worldwide agricultural model to estimate emissions from land-use change, we found that corn-based ethanol, instead of producing a 20% savings, nearly doubles greenhouse emissions over 30 years and increases greenhouse gases for 167 years. Biofuels from switchgrass, if grown on U.S. corn lands, increase emissions by 50%. This result raises concerns about large biofuel mandates and highlights the value of using waste products.
Authors: Searchinger, T.; Heimlich, R.; Houghton, R.; Dong, F.; Elobeid, A.; Fabiosa, J.; Tokgoz, S.; Hayes, D.; Yu, T-H.
Notes: Originally published in Science Express on 7 February 2008, Science 29 February 2008: Vol. 319. no. 5867, pp. 1238 - 1240DOI: 10.1126/science.1151861
Energy Independence and Security Act of 2007
12/19/2007
The Energy Independence and Security Act (EISA) of 2007 put into law many of the provisions of Executive Order 13423. The goal of the EISA law is to move the United States toward greater energy independence and security, to increase production of clean renewable fuels, to protect consumers, to increase the efficiency of products, buildings, and vehicles, to promote research on and deploy greenhouse gas capture and storage options, and to improve the energy performance of the Federal Government.
Impact of Component Size on Plug-In Hybrid Vehicle Energy Consumption Using Global Optimization
12/1/2007
Plug-in hybrid electric vehicles are a promising alternative to gas-only vehicles and offer the potential to greatly reduce fuel use in transportation. Their potential energy consumption is highly linked to the size of the components. This study focuses on the impact of the electric system energy and power on control and energy consumption. Based on a parallel pre-transmission architecture, several vehicles were modeled with an all-electric range from 5 to 40 miles on the Urban Dynamometer Driving Schedule to illustrate various levels of available electric energy. Five other vehicles were created, with various levels of power and the same battery energy. The vehicles were then simulated under optimal control on multiple combinations of cycle and distance by using a global optimization algorithm. The results from each optimization were analyzed to highlight control patterns. The potential minimal fuel consumption that can be achieved by each of them is presented in this report.
Authors: Karbowski, D.; Haliburton, C.; Rousseau, A.
Plug-In Hybrid Electric Vehicles: How Does One Determine Their Potential for Reducing U.S. Oil Dependence?
12/1/2007
Estimation of the potential of plug-in hybrid electric vehicles' (PHEVs') ability to reduce U.S. gasoline use is difficult and complex. Although techniques have been proposed to estimate the vehicle kilometers of travel (VKT) that can be electrieid, these methods may be inadequate and/or inappropriate for early market introduction estimates. Factors that must be considered with respect to the PHEV itself include (1) kWh battery storage capability; (2) kWh/km depletion rate of the vehicle; (3) liters/km use of gasoline; (4) average daily kilometers diven; (5) annual share of trips exceeding the battery depletion distance; (6) driving cycle(s); (7) charger location; (8)charging rate. Taking into account PHEV design trade-off possibilities (kW vs. kWh of battery, in particular), this paper attempts to extract useful information relating to these topices. Costs per kWh of PHEVs capable of charge depleting (CD) all-electric range vs. those CD in "blended mode (CDB) are examined. Lifetime fuel savings of alternative PHEV operating/utilization strategies are compared to battery cost estimates.
Authors: Vyas, A.; Santini, D.; Duoba, M.; Alexander, M.
Life-Cycle Assessment of Corn-Based Butanol as a Potential Transportation Fuel
11/1/2007
Butanol produced from bio-sources (such as corn) could have attractive properties as a transportation fuel. Production of butanol through a fermentation process called acetone-butanol-ethanol (ABE) has been the focus of increasing research and development efforts. The purpose of this study is to estimate the potential life-cycle energy and emission effects associated with using bio-butanol as a transportation fuel. The study employs a well-to-wheels analysis tool named the Greenhouse Gases, Regulated Emissions and Energy Use in Transportation (GREET) model developed by Argonne National Laboratory and the Aspen Plus model developed by AspenTech. The study describes the butanol production from corn, including grain processing, fermentation, gas stripping, distillation, and adsorption for products separation. Our study shows that, while the use of corn-based butanol achieves energy benefits and reduces greenhouse gas emissions, the results are affected by the methods used to treat the acetone that is co-produced in butanol plants.
Authors: Wu, M.; Wang, M.; Liu, J.; Huo, H.
